DIRECTIONS FOR USE: Measure the total width of the doorway and add up to 30mm at either end of the Door Curtain overhang the width of the door. If necessary, use a handsaw to trim either end of the hanging rail to give the required overall length. Attach the self-adhesive hook strip to a clean, dry surface, either above the doorway or directly onto the door frame. Attach the self-adhesive loop strip to the back of the hanging rail. Open the hanging rail. Align the hanging rail with the hook strip and press firmly into place, ensuring the rail is level. Peel off the protective paper from the self-adhesive strip inside the hanging rail. Offer up the insect mesh panel to the hanging rail. Measure to fit the drop of your door ensuring the weighted part of the mesh panel is at the bottom. Cut each panel to fit allowing enough mesh at the top to be secured inside the hanging rail approx. 20mm. Fold down the hinged rail, using firm pressure to click into place.